17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
JVC Projector Menu Controls:
When CalMAN is connected to a JVC projector on the CalMAN Display Control tab, all the JVC Picture
controls can be selected and adjusted from within the CalMAN software.
Picture Mode/Color Profile
On the CalMAN Display Control tab, under Display Mode Settings, select the desired combination of
Picture Mode and Color Profile settings for the projector. One of the User/Custom combinations or an
ISF mode works well. Note that THX mode does not provide gamma or CMS calibrations.
The remaining projector controls are accessed in the CalMAN DDC Window. On the Display Control tab,
click the Open DDC Window button. On the DDC Window, scroll left or right to the Display Controls page
to access the projector controls.
Input Signal/HDMI
When calibrating projector inputs that normally receive standard range YCrCb video input signals (set
top boxes and broadcast), set the projector’s HDMI Input control to ‘Standard‘ (bit levels 16-235).
When calibrating projector inputs that normally receive extended range YCrCb video input signals
(optical players and other HD sources), set the projector’s HDMI Input control to ‘Super White’ (bit levels
16-255).
When calibrating projector inputs that normally receive full range RGB input signals (computer output),
set the projector’s HDMI Input control to ‘Enhanced’ (bit levels 0-255).
Color Temp
Set the projector’s ‘Color Temp’ selection to one of the Preset settings, not to one of the Custom Color
Temp settings (unless calibrating a 3D mode).
Unless you are calibrating a JVC projector for 3D viewing, do not calibrate the Custom Color Temp 2-
point Gain and Offset controls.
When you are calibrating a JVC projector for 3D viewing, you need to calibrate the Custom Color Temp
2-point Gain and Offset controls, as the multipoint controls are not available in a 3D mode.
Advanced/Custom Gamma
When using ISF or THX modes, set the projector’s ‘Custom Gamma’ selection to a ‘Custom’ setting to
enable the multipoint gamma/grayscale controls.
Contrast and Brightness
When CalMAN performs AutoCal adjustments on JVC projectors, it automatically presets the projector’s
Contrast and Brightness controls each to ‘0,’ to properly align the projector’s control points with
CalMAN’s calibration points. After AutoCal is complete, DO NOT ADJUST the projector’s Contrast and
Brightness controls, as adjusting the controls away from the 0 presets corrupts any calibration
adjustments. Also, do not attempt to ‘touch up’ the projector’s grayscale or CMS calibration
adjustments, as that will also corrupt the entire set of calibration adjustments.
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels